Epoxy & Urethane Coatings in Maryland

Seamless, chemical-resistant coating systems for hard-working floors.

What it is

Epoxy and urethane coatings build a seamless, non-porous surface on top of the slab. Epoxy brings build, adhesion, and toughness. Urethane and polyaspartic topcoats add UV stability, abrasion resistance, and chemical resistance. Together, they make a floor that's easy to clean and stands up to spills, wheels, and wash-downs.

We spec the system to the space: thin-film for light duty, high-build or slurry systems for heavy use, and urethane cement where heat and thermal shock are part of the job.

Fresh base coat on a Mergenthaler hallway floor beside blue lockers
Mergenthaler Vocational-Technical High School, Baltimore City

Where it's used

  • Commercial kitchens and food service
  • Auto shops and fleet maintenance bays
  • Labs and healthcare back-of-house
  • Manufacturing and production areas
  • Locker rooms and restrooms

Our process

  1. Site visit: moisture testing, hardness check, and review of existing coatings.
  2. Diamond grind or shot blast to open the surface to the right profile.
  3. Repair cracks, spalls, and joints.
  4. Apply primer, body coats, and broadcast or texture as specified.
  5. Apply topcoat, then cure before return to service.

Typical timeline

Typical systems take two to four days, including cure between coats. Many systems take light foot traffic within about a day and full service after several days. Exact times depend on the product and temperature. Fast-cure polyaspartic topcoats can shorten the schedule. Nights and weekends are available.

Maintenance

Sweep and clean with a neutral or manufacturer-approved cleaner. Wipe up harsh chemicals promptly. High-traffic areas may need a fresh topcoat over time, which is far less work than a full replacement.

FAQ

Epoxy or urethane?

Most commercial systems use both: an epoxy base for build and adhesion, a urethane or polyaspartic topcoat for wear and UV. We spec it to how the floor is used.

Can you add slip resistance?

Yes. Aggregate in the topcoat adds texture. We'll match the texture to wet areas, ramps, and work zones.

What causes coatings to fail?

Usually poor prep or moisture in the slab. That's why we test and mechanically prep every floor.

Need a price on epoxy & urethane?

Send the scope or plans and we'll set up a site visit.