Surface Prep & Coating Removal in Maryland

Grinding, shot blasting, and removal of old coatings, mastics, and adhesives.

What it is

Every good floor starts with prep. We remove failed coatings, paint, mastic, carpet glue, and thinset, then profile the slab so the next system bonds the way it's supposed to. We prep for our own installs and for other trades when a GC needs a clean, profiled slab before the next flooring goes down.

Planetary grinders and shot blasting run with HEPA dust extraction to keep occupied buildings and adjacent work areas clean.

Floor grinder and vacuum hoses set up in a Mergenthaler hallway during surface prep
Mergenthaler Vocational-Technical High School, Baltimore City

Where it's used

  • Tenant turnovers and renovations
  • Failed epoxy or paint removal
  • VCT, carpet, and tile adhesive removal
  • Prep for resilient flooring, coatings, or overlays
  • Leveling high spots and trip edges

Our process

  1. Site visit to identify what's on the floor and how it's bonded.
  2. Select tooling: diamond grinding, shot blasting, or scraping.
  3. Remove material with HEPA dust extraction.
  4. Profile the slab to the CSP the next system calls for.
  5. Vacuum and leave the floor ready for the next trade.

Typical timeline

Removal rates vary widely with what's on the slab. A thin coating comes off fast. Thick mastic or multi-layer systems take longer. We give you a realistic schedule after the site visit, and night and weekend work keeps occupied spaces running.

Maintenance

Not applicable on its own. Prep sets up the finished floor. If the slab will sit exposed before the next trade, we'll tell you what to protect it from.

FAQ

What's a CSP?

Concrete Surface Profile is the ICRI scale for surface roughness. Each coating or flooring system calls for a range, and we prep to it.

Can you remove mastic that might contain asbestos?

Suspected asbestos-containing materials need testing first. If testing confirms asbestos, a licensed abatement contractor handles removal. We prep after clearance.

How dusty is it?

Our grinders run with HEPA extraction. It's a controlled, low-dust process suited to occupied buildings.

Need a price on surface prep & removal?

Send the scope or plans and we'll set up a site visit.