What it is
Flake and quartz systems broadcast colored chips or quartz sand into a resin base, then lock them in with clear topcoats. The result is a textured, decorative floor that hides dirt and wear and gives you real control over color, including school or brand colors.
Flake gives a terrazzo-like look with custom blends. Quartz builds a denser, harder-wearing surface with built-in slip resistance, which is why it's common in wet areas. Both go down over a prepped, moisture-tested slab, the same as any resin system we install.

Where it's used
- Schools, gyms, and athletic spaces
- Locker rooms and restrooms
- Commercial kitchens and break rooms
- Auto showrooms and service areas
- Lobbies and corridors
Our process
- Site visit, moisture testing, and color selection.
- Grind the slab and repair cracks and joints.
- Apply base coat and broadcast flake or quartz to the specified coverage.
- Scrape and vacuum loose material.
- Apply clear topcoats, with texture adjusted for traction.
Typical timeline
Most flake and quartz installs take one to three days per area, depending on size, repairs, and the number of coats. Polyaspartic topcoats can return a floor to service faster than standard epoxy. Your proposal lists the actual schedule.
Maintenance
Sweep, then clean with an auto-scrubber or mop and a neutral cleaner. The broadcast texture hides scuffs well. The clear topcoat can be recoated in high-traffic areas down the road.
FAQ
Can you match our colors?
Yes. Flake comes in many standard blends, and custom blends are available. At Mergenthaler Vo-Tech, we installed a flake floor in the school's colors.
Full broadcast or partial?
Full broadcast gives the most texture and durability. Partial broadcast shows more base color. We'll show samples.
Is it slip resistant?
The flake or quartz adds texture, and the topcoat texture can be tuned for wet areas.